DBOX for nissan interstar phase 1 with 2 remote keys (Immobilizer + remote control)

DBOX to deactivate the immobilizer NISSAN INTERSTAR PHASE 1 from 1997 to 2003:

VERSION WITH 2 RETRACTABLE REMOTE KEYS AND ENGRAVED BLANKS (allows remote opening)

You will need to attach a photo of the original key in order to engrave the new keys before payment.
Take a photo of the original key placed on a table, clear and sharp. 

Your infrared or original frequency remote control key no longer works correctly or not at all? The decoder box is out of order?
And when you turn the ignition on, the red light flashes quickly or stays off?

It's a problem with the immobilizer, we have the solution:

The DBOX is a new electronic decoder box card that will replace your original card. It allows you to deactivate the immobilizer of your Nissan Interstar phase 1. 

Our DBOX is a device designed to replace the original ceiling card plugged into the original connector, without any connections to be made. An easy installation on your nissan interstar phase 1 will allow you to start your vehicle again and have 2 new remote control keys. 

- The DBOX for nissan interstar phase 1 must remain installed to deactivate the immobilizer.
- The DBOX for nissan interstar phase 1 also repairs the centralization button of the ceiling light and activates the door opening in addition to the immobilizer.
- All simple metal keys will be able to start the vehicle.
- The DBOX is available in 2 versions, models with or without remote control keys (in case the decoder box is out of order but you do not want the remote controls).
- The DBOX with 2 retractable remote keys allows you to open/close your interstar remotely and start the vehicle with the same key, 2 ready-to-use remote control keys with engraved blades will be provided to you.
- The red LED on the dashboard will flash as originally once the DBOX is installed.

This model of DBOX must be specifically programmed for your nissan interstar phase 1, for this we will need the code found in your key starting with the letter E and containing 8 characters (see photo showing the code). 

If you have a question, call us, a technician will answer you immediately.